WELCOME TO SURVEYOR E-NOTES

TRADE THEORY LESSON PLAN :-

1.Introduction:All necessary guidance to be provided to the new comers to become familiar with the working of ITI system.

2.Introduction:Importance of survey or trade Job after completion of training.

3.safety:Importance of safety.

4.safety:general precautions related to the trade.

5.safety:Introduction of First aid.

6.use and handalingof instrument:List of the instrument equipments to be used during training.

7.use and handalingof instrument:use of drawing instruments and equipments with care.

8.Details and folding procedure of drawing sheet:Method of fixing of drawing sheet on drawing board.

9.Details and folding procedure of drawing sheet:of drawing sheet Layout.

10.Details and folding procedure of drawing sheet:folding and unfolding of drawing sheet.

11.Details and folding procedure of drawing sheet:dimensions of drawing sheet.

12.Lettering:Details layout of lettering (Singie stroke).

13.Lettering:Details layout of lettering (Double stroke).

14.Lettering:Details layout of numbering (Single Stroke).

15.Lettering:Details layout of numbering (Double stroke).

16.Line dimension:Types of lines and dimensioning.

17.Fundamental concept of surveying:Introduction and principle of surveying.

18.Fundamental concept of surveying:types of surveying.

19.Fundamental concepts of surveying:use of surveying.

20.Fundamental concepts of surveying:application of surveying.

21.Fundamental concepts of verious types of figure:Construction of plain figures.

22.Fundamental concepts of verious types of figure:Construction of geometrical figures.

23.Fundamental concepts of verious types of figure:Construction of curves.

24.Fundamental concepts of verious types of figure:Construction of conics.

25.Scale:Knowledge of different types of scales.

26.Scale:determine of R.F scales.

27.Scale:uses of R.F scales.

28.Scale:Construction of plain scales.

29.Scale:Construction of diagonal scales.

30.Scale:Construction of vernier scales.

31.Projection:Different types of orthographic projection.

32.Projection:Different types isometric projection.

33.Projection:sectional view of orthographic projection.

34.Projection:sectional view isometric projection.

35.Projection:projection of point of an objects.

36.Projection:projection of line of an objects.

37.Projection:projection of plane of an objects.

38.Projection:projection of solid of an objects.

39.Projection:Section of solids.

40.Projection:Isometric projection of geometrical solids.

41.conventional signs & symbols:application of conventional signs & symbols.

42.conventional signs & symbols:use of conventional signs & symbols.

43.draw liner measurement instruments:Free hand sketch of liner measurement instruments.

44.chain survey:Details about chain surveying.

45.chain survey:precaution of chain surveying.

46.chain survey:tools used in chain survey.

47.chain survey:equipements used in chain survey.

48.chain survey:detail proceidure chain survey.

49.chain survey:error in chain survey.

50.chain survey:how Prepare a site plane.

51.chain survey:calculate the area of the plane.

52.chain survey:Basic terms used in compass survey.

53.chain survey:Instrument used.

54.chain survey:precaution of compass surveying.

55.chain survey:how setting up instruement.

56.chain survey:Measure true bearing of a line.

57.chain survey:Measure fore bearing of a line.

58.chain survey:Measure back bearing of a line.

59.chain survey:Calculation of included angle from bearing local attraction.

60.chain survey:Calculation of magnetic declination.

61.chain survey:Calculation of true bearing.

62.chain survey:Calculation of closing error.

63.chain survey:Adjustment of closing error.

64.AutoCAD:Introduction of Auto CAD.

65.AutoCAD:Use of AutoCAD.

66.AutoCAD:command use in AutoCAD.

67.plane table survey:principle of plane table survey.

68.plane table survey:merits of plane table survey.

69.plane table survey:demerits of plane table survey.

70.plane table survey:Instrument used in plane table survey.

71.plane table survey:orientation of plane table.

72.plane table survey:setting up the plane table by centering.

73.plane table survey:Plane table survey by radiation methods.

74.plane table survey:Plane table survey by intersection methods.

75.plane table survey:Plane table survey by resection methods.

76.plane table survey:Plane table survey by traversing methods.

77.plane table survey:make a site plan by using it.

78.plane table survey:precaution of compass surveying.

79.Theodolite survey:Introduction and principle of theodolite survey.

80.Theodolite survey:Types of theodolite survey.

81.Theodolite survey:Parts of theodolite survey.

82.Theodolite survey:Terms used in theodolite survey.

83.Theodolite survey:Temporary adjustment of Theodolite.

84.Theodolite survey:Angle measurement process.

85.Theodolite survey:Reading of angles, field book entry of measured angles.

86.Theodolite survey:Permanent adjustment of Theodolite.

87.Theodolite survey:Determination of height of inaccessible object by Theodolite.

88.Theodolite survey:Traversing (closed) using Theodolite.

89.Theodolite survey:Traversing (open) using Theodolite.

90.Theodolite survey:Measurement of horizontal angles of a line.

91.Theodolite survey:Measurement bearing of a line.

92.Theodolite survey:Computation of coordinates from the bearing, angle length.

93.Theodolite survey:Preparation of gales traverse table.

94.Theodolite survey:Computation of area and Determine omitted measurements.

95.Levelling:Introduction and principle of levelling.

96.Levelling:types of levelling.

97.Levelling:instrument use in levelling.

98.Levelling:terms used in levelling.

99.Levelling:Temporary adjustment.

100.Levelling:permanent adjustment.

101.Levelling:Different types of levelling.

102.Levelling:Entry of level book by reduced level calculation method.

103.Levelling:Curvature of bubble tube.

104.Levelling:refraction effect sensitivity of bubble tube.

105.Levelling:Common error and their.

106.Levelling:elimination of error.

107.Levelling:Degree of accuracy.

108.Levelling:Practice of simple levelling.

109.Levelling:Practice differential levelling (fly levelling).

110.Levelling:Practice reciprocal levelling.

111.Levelling:Equate reduction of level (rise fall method) comparison of method.

112.Levelling: Equate reduction of level (height of instrument method) comparison of method.

113.Levelling:Solve problems on reduction of level.

114.Levelling:how make a plan of an area by using levelling instrument.

115.Tacheometric survey:Introduction of tachometry survey.

116.Tacheometric survey:terms use in tachometry survey.

117.Tacheometric survey:use of tachometry survey.

118.Tacheometric survey:advantages and disadvantages of tachometry survey.

119.Tacheometric survey:Tachometric constants & its determination.

120.Tacheometric survey:Determination of horizontal and distances by tachometric method.

121.Tacheometric survey:Determination of vertical distances by tachometric method.

122.Tacheometric survey:Determination of stadia constants of a tachometer.

123.Tacheometric survey:precaution of Tacheometric surveying.

124.Auto cad:Prepare traverse drawing using Auto cad.

125.Auto cad:Prepare a simple building.

126.Auto cad:Drawing using Auto cad.

127.Levelling:Entry of level book by reduced level calculation method.

128.Levelling:Curvature of bubble tube.

129.Levelling:refraction effect sensitivity of bubble tube.

130.Levelling:Common error and their.

131.Levelling:elimination of error.

132.Levelling:Degree of accuracy.

133.Levelling:Practice of simple levelling.

134.Levelling:Practice differential levelling (fly levelling).

135.Levelling:Practice reciprocal levelling.

136.Levelling:Equate reduction of level (rise fall method) comparison of method.

137.Levelling:Equate reduction of level (rise fall method) comparison of method.

138.Levelling:Equate reduction of level (height of instrument method) comparison of method.

139.Levelling:Equate reduction of level (height of instrument method) comparison of method.

140.Levelling:Solve problems on reduction of level.

141.Levelling:Solve problems on reduction of level.

142.Levelling:how make a plan of an area by using levelling instrument.

143.Levelling:how make a plan of an area by using levelling instrument.

144.Tacheometric survey:Introduction of tachometry survey.

145.Tacheometric survey:terms use in tachometry survey.

146.Tacheometric survey:use of tachometry survey.

147.Tacheometric survey:advantages and disadvantages of tachometry survey.

148.Tacheometric survey:advantages and disadvantages of tachometry survey.

149.Tacheometric survey:Tachometric constants & its determination.

150.Tacheometric survey:Tachometric constants & its determination.

151.Tacheometric survey:Determination of horizontal and distances by tachometric method.

152.Tacheometric survey:Determination of vertical distances by tachometric method.

153.Tacheometric survey: Determination of stadia constants of a tachometer.

154.Tacheometric survey:precaution of Tacheometric surveying

155.Auto cad:Prepare traverse drawing using Auto cad.

156.Auto cad:Prepare traverse drawing using Auto cad.

157.Auto cad:Prepare traverse drawing using Auto cad.

158.Auto cad:Prepare traverse drawing using Auto cad.

159.Auto cad:Prepare a simple building.

160.Auto cad:Prepare a simple building.

161.Auto cad:Prepare a simple building.

162.Auto cad:Prepare a simple building.

163.Auto cad:Drawing using Auto cad.

164.Auto cad:Drawing using Auto cad.

165.Auto cad:Auto cad.

LESSON PLAN OF WORKSHOP CALCULATION & SCIENCE 1ST YEAR :-

1.Unit, Fractions:Classification of Unit System.

2.Unit, Fractions:Fundamental and Derived Units F.P.S, C.G.S, M.K.S and SI Units.

3.Unit, Fractions:Measurement Units and Conversion.

4.Unit, Fractions:Factors, HCF, LCM and Problems.

5.Unit, Fractions:Fractions – Addition, Subtraction, Multiplication and Division.

6.Unit, Fractions:Decimal Fractions – – Addition, Subtraction, Multiplication and Division.

7.Unit, Fractions:Solving Problems by using calculator.

8.Square Root: Ratio and Proportions, Percentage:Square and Square Root.

9.Square Root: Ratio and Proportions, Percentage:Simple problems using calculator.

10.Square Root: Ratio and Proportions, Percentage:Application of Pythagoras Theorem and related problems.

11.Square Root: Ratio and Proportions, Percentage:Ratio and Proportions.

12.Square Root: Ratio and Proportions, Percentage:Direct and Indirect proportion.

13.Square Root: Ratio and Proportions, Percentage:Percentage.

14.Square Root: Ratio and Proportions, Percentage:Changing percentage to decimal.

15.Material Science:Types of metals.

16.Material Science:Physical and Mechanical Properties of metals.

17.Material Science:Types of ferrous and non-ferrous metals.

18.Material Science:Introduction of iron and cast iron.

19.Material Science:Difference between iron and steel, alloy steel and carbon steel.

20.Material Science:Properties and uses of rubber, timber and insulating materials.

21.Mass, Weight, Volume, and Density:Mass, volume, density, weight & specific gravity.

22.Mass, Weight, Volume, and Density:Related problems for mass, volume, density, weight & specific gravity.

23.Speed and Velocity, Work Power and Energy:Rest, motion, speed, velocity.

24.Speed and Velocity, Work Power and Energy:difference between speed and velocity.

25.Speed and Velocity, Work Power and Energy:acceleration and retardation.

26.Speed and Velocity, Work Power and Energy:Related problems on speed and velocity.

27.Speed and Velocity, Work Power and Energy:Potential energy, Kinetic Energy.

28.Speed and Velocity, Work Power and Energy:Potential energy, Kinetic Energy and related problems with related problems.

29.Speed and Velocity, Work Power and Energy:Work, power, energy, HP, IHP, BHP and efficiency.

30.Heat &Temperature and Pressure:Concept of heat and temperature, effects of heat, difference between heat and temperature.

31.Heat &Temperature and Pressure:Scales of temperature, Celsius, Farenhieght,Kelvin and Conversion between scales of temperature.

32.Heat &Temperature and Pressure:Temperature measuring instruments, types of thermometer, pyrometer.

33.Heat &Temperature and Pressure:Transmission of heat – Conduction, convection and radiation.

34.Heat &Temperature and Pressure:Co-efficient of linear expansion and related problems with assignments.

35.Heat &Temperature and Pressure:Problem of Heat loss and heat gain with assignments.

36.Heat &Temperature and Pressure:Thermal conductivity and insulators.

37.Heat &Temperature and Pressure:Boiling point and melting point of different metals and Nonmetals.

38.Heat &Temperature and Pressure:Concept of pressure and its units in different system.

39.Basic Electricity:Introduction and uses of electricity, molecule, atom, how electricity is produced.

40.Basic Electricity:electric current AC, DC and their comparison, voltage , resistance and their units.

41.Basic Electricity:Conductor, Insulator, types of connections- Series and Parallel.

42.Basic Electricity:Ohm’s Law, relation between VIR & related problems.

43.Basic Electricity:Electrical power, energy and their units, calculation with assignments.

44.Basic Electricity:Magnetic induction, self and mutual inductance and EMF generation.

45.Basic Electricity:Electrical Power, HP, Energy and units of electrical energy.

46.Mensuration:Area and perimeter of square, rectangle and parallelogram.

47.Mensuration:Area an Perimeter of Triangle.

48.Mensuration:Area and Perimeter of Circle, Semi-circle , circular ring, sector of circle, hexagon and ellipse.

49.Mensuration:Surface area and Volume of solids- cube, cuboids, cylinder, sphere and hollow cylinder.

50.Mensuration:Finding lateral surface area , total surface area and capacity in liters of hexagonal, conical and cylindrical shaped vessels.

51.Levers and Simple Machines:Simple machines, Effort and load, mechanical advantage, velocity ratio.

52.Levers and Simple Machines:efficiency of machine, relation between efficiency, velocity ratio and mechanical advantage.

53.Levers and Simple Machines:relation between efficiency, velocity ratio and mechanical advantage.

54.Levers and Simple Machines:Lever and its types.

55.Trigonometry:Measurement of Angle, Trigonometrical Ratios, Trigonometric Table.

56.Trigonometry:Trigonometry-Application in calculating height and distance (Simple Applications).

EMPLOYABILITY SKILL 1ST YEAR :-

1.Behavioural Skills:Expectation Setting.

2.Behavioural Skills:Personal Strength Analysis/Strength Blindness.

3.Behavioural Skills:Display Professionalism at the institute and work place.

4.Behavioural Skills:Increased social initiations relationships and networks Acceptance of peers from different cultures and social groups and work with them.

5.Behavioural Skills:Collaboration with team to prioritize the common goal and compromise individual priorities.

6.Behavioural Skills:Characteristic of a responsible citizen- Display the same by respecting self, others, environment, care for duty and value for time.

7.Behavioural Skills:Adopting best practices and aspire to follow success stories of individual for personal development.

8.English Literacy:Functional English.

9.English Literacy:Importance of Learning English Different Naming words, Words used for replacing names, Action words, Describing people, place and their use.

10.English Literacy:Simple present, past; present, past progressive Construction of simple sentences – Kinds of sentences.

11.English Literacy:Introduction to punctuation – Comma, Full stop, Question mark. Singular plural Change of tense.

12.English Literacy:Usage of appropriate words to express themselves Greetings & Self Introduction Asking &responding to questions Sharing information with others Formal & Informal communication.

13.English Literacy:Speak and provide information about workplace Discussions on current happenings.

14.English Literacy:Reading simple sentences about: a) Self b) Work c) Environment.

15.English Literacy:Simple writing skills.

16.Communication Skills:Self- Introduction.

17.Communication Skills:Perception Management.

18.Communication Skills:a. Verbal Communication.

19.Communication Skills:b. Non-Verbal Communication.

20.Communication Skills:Campus to Work.

21.I.T. Literacy:Basics of Computers.

22.I.T. Literacy:Operating System.

23.I.T. Literacy:MS-Word , MS-Excel.

24.I.T. Literacy:Web browsers & Search Engines.

25.I.T. Literacy:Email,Mobile application.

26.Entrepreneurship Skills:Need of becoming entrepreneur.

27.Entrepreneurship Skills:Ways to become a good entrepreneur.

28.Entrepreneurship Skills:Enabling environment available to become an entrepreneur.

29.Entrepreneurship Skills:Different Govt. institutions/schemes promoting Entrepreneur viz., Gramin banks, PMMY-MUDRA loans, DIC, SIDA, SISI, NSIC, SIDO.

30.Entrepreneurship Skills:Ways to set up an enterprise and different aspects involved viz., legal compliances, Marketing aspect, Budgeting, etc.

31.Entrepreneurship Skills:Day to day monitoring mechanism for Maintaining an enterprise.

32.Entrepreneurship Skills:Different Government schemes supporting entrepreneurship.

33.Entrepreneurship Skills:Examples of successful and unsuccessful entrepreneurs.

34.Maintaining Efficiency:Factors affecting productivity,Improving Productivity.

35.Maintaining Efficiency:Personal finance literacy Planning, Saving, Tax, Govt.

36.Maintaining Efficiency:schemes for financial safety e.g. Pradhan Mantri Jeevan Jyoti Bima Yojana (PMJJBY), etc.

37.Occupational Safety, Health and Environment Education Duration:Safety and Health,Occupational Hazards.

38.Occupational Safety, Health and Environment Education Duration:Accident and Safety,First-aid ,Basic provisions on safety and Health.

39.Occupational Safety, Health and Environment Education Duration:Environmental Issues,Environmental ethics,Disaster Management.

40.Essential skills for success:Building basic skills to navigate life and career. Self-Awareness, articulating personal values, Value-based decision making, Dilemma situations.

41.Essential skills for success:Identify sources and types of stress (positive / negative stress), Managing stress (long-term / short-term), Handling rejection and building resilience, Identify day wasters.

42.Labour Welfare Legislation:Benefits guaranteed under various acts- Factories Act, Apprenticeship Act, Employees State Insurance Act (ESI).

43.Labour Welfare Legislation:Payment Wages Act, Employees Provident Fund Act, The Workmen’s compensation Act, POSH. Interpret applicable labour and industrial laws.

44.Quality Management:Quality Concept and Consciousness,Concept of Quality Management (QMS) & PDCA ,Concept of ISO.

45.Preparation to the world of work:Career Plan,Basic Professional Skills.

46.Preparation to the world of work:Career Pathways,Search and apply for a job.

47.Customer Interaction / service:Greeting customers,Probing-understanding customer requirements.

48.Customer Interaction / service:Handling grievances,Relationship building with customers.

49.Customer Interaction / service:To identify the importance of probing.

50.Customer Interaction / service:Analyasis of whole topic.